Bosch Kl 1208 User 39-s Manual Guide
There are no user-serviceable parts inside. If the power cord is damaged, it must be replaced by a professional to avoid shock hazards. electronic power systems pty. ltd. Further Exploration View historical workshop equipment data on the Bosch Classic Archive
The front panel features a physical needle gauge that displays the charging current in Amperes (A).
: The charger uses an iwu characteristic curve, which automatically prevents overcharging. This allows the battery to remain connected for several weeks without supervision. Bosch Kl 1208 User 39-s Manual
The keypad utilizes Light Emitting Diodes (LEDs) to communicate system status:
| Feature | Description | | :--- | :--- | | | Analog battery charger / maintainer | | Max Charging Current | 6 Amps (with current limiting) | | Display | Analog ammeter (needle) | | Protection | Thermal cut-out, reverse polarity protection, external 30A blade fuse | | Construction | Robust, user-serviceable design | | Compatible Batteries | Primarily designed for 12V lead-acid batteries | There are no user-serviceable parts inside
: The battery may be faulty and should be professionally tested.
220V – 240V AC, 50/60 Hz (Standard European/International mains power) Output Voltage: 12V DC Charging Current: 8 Amps (Arith.) / 12 Amps (Eff.) This allows the battery to remain connected for
The KL 1208 uses a simple LED system to communicate the charging status: : Power is on and the unit is active. Yellow LED (Blinking) : Charging is in progress.
This is where the manual shines. The specifications section provides in-depth data on crimping force (kN), crimping ranges (mm²), and die compatibility.
No . The KL1208 is a manual battery charger. It does not automatically switch to a maintenance mode and should be disconnected once the battery is fully charged to prevent overcharging.
: Indicates a malfunction, such as reverse polarity, a short circuit, or overloading. Special Features
There are no user-serviceable parts inside. If the power cord is damaged, it must be replaced by a professional to avoid shock hazards. electronic power systems pty. ltd. Further Exploration View historical workshop equipment data on the Bosch Classic Archive
The front panel features a physical needle gauge that displays the charging current in Amperes (A).
: The charger uses an iwu characteristic curve, which automatically prevents overcharging. This allows the battery to remain connected for several weeks without supervision.
The keypad utilizes Light Emitting Diodes (LEDs) to communicate system status:
| Feature | Description | | :--- | :--- | | | Analog battery charger / maintainer | | Max Charging Current | 6 Amps (with current limiting) | | Display | Analog ammeter (needle) | | Protection | Thermal cut-out, reverse polarity protection, external 30A blade fuse | | Construction | Robust, user-serviceable design | | Compatible Batteries | Primarily designed for 12V lead-acid batteries |
: The battery may be faulty and should be professionally tested.
220V – 240V AC, 50/60 Hz (Standard European/International mains power) Output Voltage: 12V DC Charging Current: 8 Amps (Arith.) / 12 Amps (Eff.)
The KL 1208 uses a simple LED system to communicate the charging status: : Power is on and the unit is active. Yellow LED (Blinking) : Charging is in progress.
This is where the manual shines. The specifications section provides in-depth data on crimping force (kN), crimping ranges (mm²), and die compatibility.
No . The KL1208 is a manual battery charger. It does not automatically switch to a maintenance mode and should be disconnected once the battery is fully charged to prevent overcharging.
: Indicates a malfunction, such as reverse polarity, a short circuit, or overloading. Special Features
