Yayusi S2 User Manual [extra Quality] Access

: Use the "+" and "-" buttons to change the numbers while they are flashing.

Yayusi S2 User Manual: Complete Guide to Your Bluetooth Speaker

: To set the alarm, press the Power button, then use the Next button to cycle through the hour, minute, and alarm toggle settings.

Switch modes (Bluetooth ➡️ TF Card ➡️ AUX ➡️ FM Radio ➡️ Clock). Play / Pause (📞 Phone Icon):

Short press the [M] (Mode) button to cycle through Bluetooth, FM Radio, and AUX. 2. Setting the Time & Alarms yayusi s2 user manual

If the sound is crackling, the battery may be low, or the speaker is out of range. Charge the device.

You can view a complete text-based version of the instructions on Manuals+ or access the technical report on device.report .

: Short press to cycle through modes: Bluetooth > TF Card > FM Radio > AUX > Clock. SET : Used for adjusting the time and alarms.

If your printed manual is lost:

This comprehensive user manual provides everything you need to know to set up, operate, and troubleshoot your Yayusi S2. 📦 What’s in the Box 1 x Yayusi S2 Bluetooth Speaker Clock

Press the button briefly; the hour digits will begin flashing on the mirror display. Use the [Plus] or [Minus] buttons to adjust the hour.

| Problem | Possible Solutions | | :--- | :--- | | | 1. Make sure the speaker is in Bluetooth mode (not USB, TF Card, or AUX). 2. Turn the speaker off and on again to restart pairing mode. 3. Delete the “yAyusi S2” from your phone’s Bluetooth list and re-pair. | | No sound from USB/TF card. | 1. Ensure your audio files are in MP3 format. 2. The USB drive or TF card must be formatted to FAT32 and not exceed 32GB. 3. Eject and re-insert the storage device. | | Poor FM radio reception. | 1. Attach the 3.5mm telescopic antenna and fully extend it. 2. Move the device closer to a window or away from metal objects and other electronics that may cause interference. | | Display shows incorrect time. | The internal clock may need to be reset. Follow the steps in Chapter 3 to set the time again. This can happen if the battery is fully drained. | | Short battery life. | Some users have noted the battery lasts only a few days of heavy use. To preserve battery life, lower the LED brightness and turn off the device when not in use. | | Speaker not turning on. | The battery may be completely drained. Connect it to a power source using the provided cable and let it charge for at least 30 minutes before trying to turn it on. |

Press again to switch to minutes, and adjust them using + and - . Press Set to confirm. : Use the "+" and "-" buttons to

Ensure your phone is within 10 meters (33 feet) of the speaker.

She took a walk. She returned. She solved the problem in two hours.

Plug the other end into a 5V USB wall adapter or a computer port.

Before using your speaker for the first time, it is recommended to charge it fully. Play / Pause (📞 Phone Icon): Short press