Lahti Precision Tpl400 Manual //top\\ Online

The type of or weight sensors wired to your instrument.

Available in panel-mount or stainless steel field enclosures (IP65/IP67 rated) for moisture and dust protection.

: Utilizes Excitation (+/-) and Signal (+/-). Ensure that jumper links are manually shorted between the Excitation and Sense terminals if a 4-wire cable is used. Analogue Outputs

You can modify the transmitter parameters by utilizing either the built-in programmer keypad or an authorized external handheld programming tool. lahti precision tpl400 manual

Connect the main power source to the designated terminals. Verify whether your unit is configured for AC power (typically 115/230V AC) or DC power (typically 24V DC). Always ground the chassis.

Failure to follow this exact sequence leads to erratic feeding (e.g., printing half on one label, half on the next).

Ensuring accuracy across the entire range. C. Operation and Configuration The type of or weight sensors wired to your instrument

The TPL-400 is explicitly designed for field installation. Its various enclosure options provide flexibility to match its operating environment. The standard plastic case offers IP65 protection, making it resistant to dust and water jets. For more aggressive industrial or outdoor settings, the die-cast aluminum or stainless steel options provide enhanced mechanical protection and corrosion resistance. The unit can also be mounted on a standard DIN/EN 35 rail, simplifying integration into a control cabinet.

The manual lists 203 vs 300 dpi options. For 4pt text or high-density barcodes (Code 128), the manual’s default DARKNESS setting often bleeds. Lower darkness to 8, slow speed to 2 IPS, and ensure the ribbon is high-quality (resin, not wax).

: Utilizes Excitation (+/-), Sense (+/-), and Signal (+/-). This compensates for voltage drops across long cable runs. Ensure that jumper links are manually shorted between

Finding the correct revision of the manual is essential. Lahti Precision has updated the TPL400 firmware and mechanics over the years. Here is the hierarchy of sources:

Ensure adequate clearance for cable glands to maintain the IP65 seal.

The manual defaults to hardware handshaking (RTS/CTS). If you experience data loss, change to XON/XOFF (software handshaking) via the menu. This is a hidden but powerful tweak.