Emco Compact 5 Manual Exclusive |link| Jun 2026

Tighten the grub screws on the cross-slide and top-slide gib strips to eliminate any mechanical play or wiggle.

Feed rate too fast, spindle speed too slow, or incorrect tool height.

Best for self-centering round or hexagonal stock. emco compact 5 manual exclusive

The tailstock can be locked at any position along the bedway using the rear clamping lever. The internal spindle is extended via the rear handwheel to feed drill bits, reamers, or dead centers into the workpiece. Thread Cutting and Gear Setup

: Coat all bright metal surfaces with light machine oil immediately after cleaning. Basic Operations and Controls Tighten the grub screws on the cross-slide and

: Always use an idler to maintain rotation direction.

Factory-fresh or long-stored machines are coated in thick anti-rust grease. Clean all surfaces thoroughly with mineral spirits and immediately apply a light coat of high-quality machine oil. Control Layout and Spindle Speed Adjustment The tailstock can be locked at any position

The ground and hardened bed ways provide excellent sliding surfaces for the carriage.

The longevity of the Emco Compact 5 relies heavily on the maintenance of its unique design elements.