Motorola Cp1300 Frequency List -

If dealer programming is unlocked on your firmware, you can change individual channel frequencies directly from the keypad:

The frequency you transmit on (usually the same as Rx for simplex).

Ensure your channel spacing is set to 12.5 kHz if required by local government mandates. Mixing 25 kHz and 12.5 kHz channels causes distorted, quiet, or clipped audio. To help me tailor any further technical help, let me know: What is the exact model number from the chassis sticker? What country or region are you operating these radios in?

If you are unsure which frequency band your radio uses, you can verify it through these methods: motorola cp1300 frequency list

Whether you are configuring a brand-new fleet of radios, troubleshooting a dead channel, or trying to match frequencies to communicate with an entirely different brand of radio (like a Kenwood or Icom), this guide will walk you through the frequencies, channel spacing, and programming fundamentals of the Go to product viewer dialog for this item. Understanding Motorola CP1300 Frequency Bands Because the Motorola CP1300 Go to product viewer dialog for this item.

The CP1300 is available in several models, each tailored for a specific portion of the radio spectrum. It supports up to with switchable channel spacing of 12.5 or 25 kHz. Model Band Frequency Range Common Use Cases VHF 136 – 174 MHz Outdoor use, rural areas, and flat terrain UHF (Band 1) 403 – 446 MHz Standard indoor/outdoor urban environments UHF (Band 2) 435 – 480 MHz Building-dense areas and high-rise operations UHF (Band 3) 350 – 390 MHz Specific regional or government allocations Article: Maximizing Communication with the Motorola CP1300

The Motorola CP1300 is not a dual-band radio. It is sold in three distinct hardware models, each operating within a specific frequency band. You cannot program a VHF frequency into a UHF radio, or vice versa. If dealer programming is unlocked on your firmware,

Given the above, you need to follow a specific workflow.

If your CP1300 is programmed to the exact same frequency as another radio but you still cannot hear each other, check the following variables:

Note: VHF is best for outdoor use with unobstructed line-of-sight, while UHF is better for penetrating through concrete, steel, and indoor building structures. Motorola Default Frequencies To help me tailor any further technical help,

If you experience interference, try changing the channel frequency to a higher or lower value within your authorized range.

In most jurisdictions, using the CP1300 requires a valid commercial land mobile radio license issued by your national telecom regulator (such as the FCC, Ofcom, or local equivalent).

to communicate with other popular radios (such as Baofeng, Kenwood, or Icom), you will need to enter matching RX and TX frequencies, as well as the exact same CTCSS or DCS privacy codes.

Most CP1300 VHF radios support 12.5kHz narrowband, required for MURS 4 & 5.

I can generate a tailored frequency map optimized specifically for your team's coverage needs. Share public link