Log in using the credentials provided in your manual (default settings often apply). 2. Locating the Firmware Update Section Navigate to the or Maintenance section in the menu. Select Firmware Update 1.2.1. 3. Uploading the Firmware Click the Upload button.
(e.g., being stuck in 1-phase charging when 3-phase is expected) and accidental activation of the "External Enable Input" which can prevent charging. Critical Precautions Vestel Firmware Upgrade - Databeat Knowledge base
: Newer EV models or vehicle software updates can introduce communication errors via the ISO 15118 protocol. Firmware updates fix these handshake issues.
Solution: Perform a hard reboot (cut power for 60 seconds). If that fails, re-check the network configuration in the app. Charging starts and then stops.
Protecting your home network and charger from potential cybersecurity threats.
(on a remote or internally, depending on the specific Vestel sub-model/interface) while powering the unit back on.
Newer "Smart" versions are designed to receive updates through this app rather than manual PC uploads. Over-the-Air (OTA) Branded versions (like E.ON Drive
Solution: The firmware might be incorrect or corrupted. Try re-downloading the file and re-flashing. Charger cannot connect to WiFi/OCPP after update.
If you are encountering specific issues during your update process, let me know. Please share your (e.g., EVC04-AC11), your current firmware version , and any error codes or LED light patterns you see so I can provide precise troubleshooting steps. Share public link
support, which was officially added in versions like 2.77 and refined in later 3.x releases. Local Management:
Reboot your home router. If the Wallbox is installed far from the router, consider temporarily setting up a mobile hotspot nearby to complete the download. Red Error Light After Update
: Ensure your computer or tablet is connected to the same network as the wallbox. Open your browser and log in to the charger’s configuration page.
: Go to the "System Maintenance" section.