Wlx-893u3 Manual Guide

To begin using the docking station for standard read/write operations:

External DC 12V power adapter (required for 3.5" hard drives). 2. Hardware Installation

Supports both 2.5-inch and 3.5-inch SATA (I/II/III) and IDE hard drives.

To prevent data corruption or electrical damage to your hard drives, always follow this specific sequence when connecting the WLX-893U3. Step 1: Insert the Drive Wlx-893u3 Manual

Notes:

: Accepts SD, microSD (TF), MS, M2, xD, and CF cards.

| | 2. Insert the Drive | 3. Connect the Power | | :--- | :--- | :--- | | Check your drive’s interface type (SATA or IDE) and its form factor (2.5" or 3.5"). | Gently insert the drive into its respective slot, ensuring the connector pins are properly aligned. | Connect the power supply to the dock and to a power outlet. Connect the dock to your computer using the USB cable. | | For SATA drives: Ensure the L-shaped connector is oriented correctly. | For IDE drives: Line up the two rows of pins with the socket and push the drive in until it's fully seated. | Wait a moment for your computer to detect the connected drive. | To begin using the docking station for standard

USB 3.0 (up to 5Gbps) for fast data transfer, backward compatible with USB 2.0/1.1.

: Locate the physical ON/OFF switch on the rear panel and toggle it to ON . The integrated Power LED will illuminate.

Supports drives up to 10TB or more (depending on firmware). Card Reader: SD, microSD, TF, CF, MS, and XD formats. To prevent data corruption or electrical damage to

For safe operation, always follow these precautions:

The cloning process is complete when all LED lights stop flashing and turn solid. 4. Troubleshooting