Requires only 13 µL of whole blood in Venous/Capillary mode, or 20 µL in Prediluted mode. Throughput: Processes up to 30 samples per hour.
Perform an internal "Zap" procedure via the service menu to clear stubborn protein deposits off the aperture. Monthly Maintenance
The analyzer relies on specific reagents to perform cell lysing, diluting, and cleaning. Ensure the following lines are securely connected to their respective containers without kinks:
Run an intensive probe cleanser cycle using Mindray Probe Cleanser. Removes stubborn protein clots from the apertures. Inspect waste tubes and clean the exterior surfaces.
: Pre-programmed for 13 animal species with 3 additional user-defined slots. Parameters
The device must be operated by trained personnel; improper operation or repairs by unauthorized individuals can void the warranty.
Run a blank cycle to ensure background parameters are acceptable (WBC ≤is less than or equal to ≤is less than or equal to ≤is less than or equal to ≤is less than or equal to
Select the correct icon on the touchscreen user interface.
Verify sample quality for clots. Re-mix and re-run. Consider a manual blood smear review.
Run certified veterinary control material daily or weekly based on your clinic's workload.
Run the automated shutdown sequence using E-Z Cleanser. This prevents protein crystal formation in the micro-apertures overnight.
: Maintain at least 20 cm of clearance on all sides for proper ventilation and fluid line access. Fluidic Connections
Choose between or Automated Calibration using specific veterinary control blood.
Use only genuine Mindray-specified reagents (diluent, lyse, cleaner) to ensure accurate results. The system will alert you to low reagent levels.
The analyzer will beep, signaling to remove the tube.
Requires only 13 µL of whole blood in whole blood mode, or 20 µL in pre-diluted mode, making it ideal for small or pediatric animal patients.
Tell you how to (like HGB or clog errors) Explain the start-up or shut-down procedure Provide instructions for running a quality control sample Let me know which part of the manual you need. Manual BC 2800 Vet | PDF | Computer Keyboard - Scribd
: Ensure the machine is properly grounded via the grounding pole at the back to prevent electrical interference.
Requires only 13 µL of whole blood in Venous/Capillary mode, or 20 µL in Prediluted mode. Throughput: Processes up to 30 samples per hour.
Perform an internal "Zap" procedure via the service menu to clear stubborn protein deposits off the aperture. Monthly Maintenance
The analyzer relies on specific reagents to perform cell lysing, diluting, and cleaning. Ensure the following lines are securely connected to their respective containers without kinks:
Run an intensive probe cleanser cycle using Mindray Probe Cleanser. Removes stubborn protein clots from the apertures. Inspect waste tubes and clean the exterior surfaces.
: Pre-programmed for 13 animal species with 3 additional user-defined slots. Parameters mindray bc 2800 vet user manual
The device must be operated by trained personnel; improper operation or repairs by unauthorized individuals can void the warranty.
Run a blank cycle to ensure background parameters are acceptable (WBC ≤is less than or equal to ≤is less than or equal to ≤is less than or equal to ≤is less than or equal to
Select the correct icon on the touchscreen user interface.
Verify sample quality for clots. Re-mix and re-run. Consider a manual blood smear review. Requires only 13 µL of whole blood in
Run certified veterinary control material daily or weekly based on your clinic's workload.
Run the automated shutdown sequence using E-Z Cleanser. This prevents protein crystal formation in the micro-apertures overnight.
: Maintain at least 20 cm of clearance on all sides for proper ventilation and fluid line access. Fluidic Connections
Choose between or Automated Calibration using specific veterinary control blood. Monthly Maintenance The analyzer relies on specific reagents
Use only genuine Mindray-specified reagents (diluent, lyse, cleaner) to ensure accurate results. The system will alert you to low reagent levels.
The analyzer will beep, signaling to remove the tube.
Requires only 13 µL of whole blood in whole blood mode, or 20 µL in pre-diluted mode, making it ideal for small or pediatric animal patients.
Tell you how to (like HGB or clog errors) Explain the start-up or shut-down procedure Provide instructions for running a quality control sample Let me know which part of the manual you need. Manual BC 2800 Vet | PDF | Computer Keyboard - Scribd
: Ensure the machine is properly grounded via the grounding pole at the back to prevent electrical interference.