Ch-899: Chouchin Radio Controlled Clock Manual

The clock's time-sync icon (signal waves) will begin to flash.

Replace both AA batteries with fresh, alkaline batteries. Do not mix old and new batteries. Incorrect Time Zone setting

: Press and hold the M.SET button until the hands advance quickly. Release it to stop, then tap to advance in 1-minute increments.

Forces the clock to immediately search for the radio atomic signal. ch-899 chouchin radio controlled clock manual

Ensure the Daylight Savings Time (DST) switch is in the ON position unless you live in an area that does not observe it. Insert Battery: Use one fresh 1.5V AA alkaline battery.

Do not hang the clock on metal walls or inside structures with heavy steel framing, as this acts as a Faraday cage and blocks radio waves.

After inserting batteries, the radio tower icon (usually located on the display) will flash. The clock's time-sync icon (signal waves) will begin

Allows setting the correct time zone (e.g., P=Pacific, M=Mountain, C=Central, E=Eastern). 4. Manual Setting Instructions

For the best results, set up your clock near a window during evening hours when atmospheric interference is lowest.

: Adjust the month, press SET , then adjust the day, and press SET . Incorrect Time Zone setting : Press and hold the M

For the best results, perform the setup near a window to ensure a clear path for the radio signal. The Clock Depot Select Time Zone/DST : If your model has switches on the back, set the (P, M, C, E for North America) and ensure the (Daylight Saving Time) switch is in the 'ON' position. Insert Battery

To reset the movement, remove the battery, wait 1 minute, and reinsert it. This will prompt the hands to return to 12:00 and restart the search process.