š The SpeedStile FL defaults to open on power loss ā required for fire code. Test this before sealing anything.
: Use concrete with a minimum resistance of 30N/mmĀ² .
: Use shims to ensure the frame is perfectly level in both transverse and longitudinal directions. Pre-Powering Checks
Position the cabinets over the holes, carefully feeding pre-laid cables through the chassis base cutouts.
Vacuum out all dust and debris from the holes to ensure proper anchor grip. gunnebo speedstile fl installation manual
Place the cabinets over the pre-drilled cable conduits.
Manually test that the glass wings move freely without rubbing against the cabinet body. Switch on the main AC circuit breaker.
Additional detailed drawings and technical datasheets are available through the Gunnebo Entrance Control official portal.
Move the cabinets aside and drill holes using an appropriate masonry bit matching your anchor bolts (typically M10 or M12 expansion anchors). š The SpeedStile FL defaults to open on
Insert the expansion anchors. Use a spirit level on top of the cabinet frame to check vertical and horizontal alignment.
Route the mains power cable into the Master cabinet's integrated power supply unit (PSU) enclosure.
Youāre not just bolting down a lane. Youāre building the first line of defense for an office, stadium, or transit hub. The SpeedStile FL is sleek, fast, and unyieldingābut only if you install it right. Letās get that glass wing moving like it means it.
The Gunnebo SpeedStile logic board accepts volt-free (dry contact) signals for authorization commands. : Use shims to ensure the frame is
: The SpeedStile FL integrates with all standard reader technologies, including proximity, magnetic stripe, barcode, and biometric systems. Remote lane control can be managed via a push-button console, digital touchscreen, or tablet/smartphone using Gunnebo EntraLinq.
is a high-end, fast-acting speed gate designed for secure, authorized access control in areas with high pedestrian traffic. Proper installation is critical to ensure the longevity, security, and smooth operation of these automated entrance systems.
Access the onboard interface using the digital display or by connecting a laptop via the Gunnebo service tool.