H-ig41-uatx Rev 1.1 Manual

Rev 1.0 used DDR2 memory – Rev 1.1 is DDR3 only . Using DDR2 will damage the board.

If you install 8GB of RAM, the system may only recognize 4GB or fail to post. The G41 chipset in this configuration has a hard 4GB limit. h-ig41-uatx rev 1.1 manual

Note: TDP for this board is typically limited to 65W-95W, so high-end 130W Extreme Edition processors may not be stable. 4. Memory Configuration (DDR3) This board is specific to , not DDR2. Slots: Two 240-pin DDR3 DIMM slots. Speed: Supports DDR3 1066 MHz or 1333 MHz. The G41 chipset in this configuration has a hard 4GB limit

The (also known as the Foxconn Eton or HP Eton ) is a budget-focused microATX motherboard commonly found in legacy HP and Compaq business desktop PCs, such as the Compaq 500B , Compaq 505B, and some HP Pro 3000 series machines. Memory Configuration (DDR3) This board is specific to

Are you facing any specific right now? Share public link

The (also known as the HP/Foxconn Eton ) is a budget-friendly LGA775 motherboard originally designed for HP and Compaq systems like the HP 500B Microtower . While reliable for basic tasks, it has specific hardware quirks—particularly regarding memory and SSD compatibility—that you should know before building or upgrading. ⚙️ Core Technical Specifications

The H-IG41-uATX is built on the Intel G41 chipset, which offers a balance of efficiency and performance for older LGA 775 chips. Intel G41 (Northbridge) + ICH7 (Southbridge). Form Factor: MicroATX (244 x 244 mm).