Xtralis Vsc Software -

The internal particle filter is saturated and blocking optimal sample flow.

: Users can retrieve event logs and filter them by time or event type to analyze system performance over time. Supported Product Lines

Need a refresher on VSC 4.0? [Contact your local Xtralis Certified Partner] for a one-hour workflow audit.

XtraLis VSC is designed to be versatile, supporting a wide array of connection protocols to integrate seamlessly into existing building infrastructures: xtralis vsc software

Windows 10 or Windows 11 (64-bit recommended) Processor: Intel Core i5 or equivalent (2.0 GHz or higher) RAM: 4 GB minimum (8 GB recommended)

Supporting older standard units like the LaserPLUS (VLP), LaserCOMPACT (VLC), and LaserFOCUS (VLF).

Product Report: Xtralis VSC (VSW-100) Software Xtralis VSC (VESDA System Configurator) is a comprehensive software application designed for the configuration, commissioning, and maintenance of the full range of VESDA and ICAM fire detection products. The internal particle filter is saturated and blocking

Aspirating smoke detectors rely on a internal fan (aspirator) to draw air through sampling pipes. In VSC, you can adjust the aspirator speed (measured in RPM or volts) to match the total length of your pipe network. Once the physical pipes are installed and the fan speed is set, you must run the command. This tells the detector to memorize the baseline air pressure, allowing it to accurately detect future pipe blockages or breakages. 6. Maintenance, Diagnostics, and Troubleshooting

Check your device manager to ensure the USB/Serial driver is correctly installed. If using Ethernet, verify your PC is on the same subnet as the VESDA network interface card. "Configuration is Read-Only"

What the system is protecting (e.g., data center, cleanroom, warehouse) AI responses may include mistakes. Learn more Share public link [Contact your local Xtralis Certified Partner] for a

Right-click the detector in the device tree and select .

Managing your VESDA network involves three primary phases: installation, calibration, and routine testing. 1. Connecting to a Detector Launch the Xtralis VSC software.

The software allows for the full configuration of all XtraLis fire detection products, including VESDA smoke detectors, LCD programmers, and High-Level Interfaces (HLIs). Whether it's a single standalone unit or a large, networked system spanning multiple buildings, VSC provides the tools to set flow and smoke thresholds (often based on ASPIRE pipe network design calculations), configure zones, manage remote modules, set relay actions, and define Ethernet or Wi-Fi parameters. This centralized control drastically reduces commissioning time and minimizes the risk of human error compared to manual programming at the device level.

VSC serves as the digital interface between the user and the detection hardware. It transforms the complex analog data collected by aspirating detectors into intuitive, visual representations, allowing facility managers and safety officers to monitor smoke levels in real-time, configure device parameters, and manage alarms from a single workstation.

Whether performing initial commissioning of a new installation, troubleshooting an active fault, or managing a large-scale VESDAnet network across multiple buildings, VSC provides a unified, professional-grade platform that replaces multiple legacy tools while adding significant functionality. The 90-day trial period allows organizations to evaluate the software at no cost, and the licensing process—coordinated through Xtralis partner channels—provides flexible deployment options.