Infineon Memtool 4.9 !full!

While Infineon pushes forward with AURIX and ARM-based controllers, the company has wisely left Memtool 4.9 in the public domain—a testament to the importance of backward compatibility. For engineers, it’s a lightweight, reliable, and eminently usable piece of software that has earned its place on every legacy embedded workbench.

Under , select the correct COM port or DAS server. Connect and Flash:

Native integration with Infineon XMC1000/XMC4000, AURIX TC2xx/TC3xx, TRAVEO T2G, and legacy TriCore series.

: Standard RS232 (UART) or USB-to-target via Direct Attached Storage (DAS). Important Considerations infineon memtool 4.9

First, a quick refresher. Memtool isn’t an IDE—it’s a dedicated in-system programmer . Think of it as a specialized Swiss Army knife for flashing hex files, S-records, or binary files onto Infineon silicon.

XMC1000 and XMC4000 series support makes Memtool ideal for industrial automation, motor control, and power conversion applications.

: Provides ready-to-use configuration files for the full range of Infineon evaluation boards and application kits. Batch Command Support : Allows for basic automation via batch commands (e.g., connect, open_file, select_all_sections, program). Supported Hardware & Connections Microcontroller Families : AURIX™/TriCore™, XMC1000, XMC4000. : XC800, XC16x, XC2000. Connectivity (UART) ports. JTAG and DAP communication via the Infineon Devices Access Server (DAS) Hardware Adapters : Onboard wigglers for evaluation kits or the external miniWiggler for custom boards. System Requirements Operating System : Microsoft Windows 10 (64-bit) or newer. Permissions : Administrator privileges are required for installation. Software Bundles : Version 4.9 typically includes Infineon DAS V7.3.7 to handle target communications. Usage Limitations : Officially intended for evaluation purposes only, rather than mass production. Availability : While free from the Infineon Software Tools While Infineon pushes forward with AURIX and ARM-based

If successful, the status bar will show: “Device ID: XC878, Flash size: 64KB, Boot ROM version 1.2” .

Memtool 4.9 does not support modern AURIX (TC2xx, TC3xx) families. For those, you need AURIX Flasher or Memtool 5.x.

Connect the miniWiggler probe to the target board's DAP/JTAG header. Connect the USB side of the probe to your PC. Power up the target board. Flash size: 64KB

I can help you with: Step-by-step guidance for setting up your miniWiggler

: Erase entire modules or specific sectors, program files, and verify contents. File Support : Load and program standard Motorola S-Record Protection Management : Set or reset chip and sector protection. Special Configurations BMI (Boot Mode Index) UCB (User Configuration Blocks) for specific device families. Supported Device Families