A progress bar will appear. Wait until it reaches 100%. This process usually takes between 1 to 3 minutes. Step 5: Finalize and Reboot
: Ensure the file is named exactly FSI-1014.bin . The system specifically checks for this filename at startup.
Before diving into the technical steps, it is vital to understand the benefits. FNIRSI has released multiple firmware versions since the 1014D’s launch. You might be running version 1.0.1 or 1.0.2, while the latest stable versions often reach 1.0.4 or higher (special editions like 1.0.51 for modified hardware). Here is what an update brings to the table:
FNIRSI-1014D Go to product viewer dialog for this item. Firmware Update: The Ultimate Guide to Enhancing Your 2-in-1 Oscilloscope Updating the firmware on your
: A USB "A-to-A" data cable (though non-standard, it is required for this device). fnirsi-1014d firmware update
This happens if you flash firmware meant for a different screen hardware revision. You will need to locate the legacy firmware file or an alternative revision patch and re-flash the device using the blind bootloader method (Step 3).
Press and hold the designated boot-key combination (usually holding down the or "RUN/STOP" button while plugging in the USB cable).
To update the firmware on your FNRiSi-1014D:
– Requires FNIRSI-1014D Upgrade Tool.exe (often flagged by antivirus as suspicious). Works only on Windows 7/10. A progress bar will appear
Turn the device back on. The device will automatically detect the new firmware and start the update process. This should complete quickly. Troubleshooting Update Issues If you encounter issues during or after the update:
Updates patch the sluggish screen refresh rates and menu navigation lag.
Would you like the step-by-step physical access guide, or the link to the most stable community-vetted firmware version?
: For advanced users, there are community efforts on GitHub dedicated to reverse-engineering the firmware to fix deep-seated bugs. Step 5: Finalize and Reboot : Ensure the
Press and hold the designated update shortcut key combo (usually the or RUN/STOP button, depending on the revision) while flipping the power switch ON .
Look at the Update Tool interface on your PC. The connection status indicator should turn from Red to , indicating the device is detected.
For those looking to solve bugs or enhance their device, independent online resources have proven invaluable. The most significant source is the , where enthusiasts have been actively reverse-engineering the scope. This work has led to the creation of several open-source firmware projects.