Canon+service+tool+v4718+updated !link! Instant

A: No. Canon Service Tools require a direct USB connection. Network ports are ignored.

Unlike standard user software, the Service Tool is a that requires no installation—it can be run directly from a USB drive or a folder on your computer. It opens a window with several tabs (Main, Other, Auto, Pro) that give you access to functions like resetting the ink absorber counter, setting regional destination codes, printing and saving EEPROM data, performing nozzle checks, and running test prints.

After completing a software reset, consider opening the lower casing to wash and dry the felt pads, or install an external waste ink bottle mod to redirect waste ink safely outside the chassis. If you ran into any issues during the process, let me know: What exact printer model are you using? What color or pattern is your printer's light flashing?

| Feature | v3400 / v4000 | v4718 (Updated) | |---------|----------------|------------------| | Waste ink reset | ✅ Yes | ✅ Yes | | EEPROM clear | ✅ Yes | ✅ Yes | | Support for TS series | ❌ Limited | ✅ Extended | | Support for G series (tank) | ❌ No | ✅ Yes (partial) | | USB auto-detection | ❌ Manual port select | ✅ Improved plug-and-play | | 64-bit Windows compatibility | ⚠️ Unstable | ✅ Fully compatible | | Anti-virus false positive handling | High | Reduced (still present) | canon+service+tool+v4718+updated

V4718 is not officially distributed by Canon—it is a tool intended for authorized service centers only. However, the printer repair community has made it available through various sources. , but proceed with appropriate caution.

Broadly supports select models from the iP, MP, MX, and Pro series of the same generation. Operational Requirements

V4718 is noted as a newer, non-blocking alternative to V4713 for these models Unlike standard user software, the Service Tool is

: Connect the printer directly to your PC via a high-quality USB cable . Wireless (Wi-Fi) connections will fail to interface with the service firmware.

Canon MG6460 | PrinterKnowledge - Laser, 3D, Inkjet Printer Help

Release the button, then press it 5 times (number varies by model, 5 is standard for most MG/G series). If you ran into any issues during the

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

1. Start with the printer powered off. 2. Press and hold the Stop button (sometimes marked with a red triangle). 3. While holding Stop, press and hold the Power button. 4. Release the Stop button while continuing to hold Power. 5. While still holding Power, press and release the Stop button 5 times. 6. Release the Power button.

If you reset the electronic counter multiple times without ever cleaning or swapping out the physical felt absorbers inside the bottom base tray, excess liquid ink will eventually spill past the retention borders. This can ruin furniture or short-circuit your internal power supply unit. For high-volume printing configurations, consider opening up the bottom casing to wash out and dry the internal felt pads, or install an external waste ink bottle mod for easy draining.

: Provides access to advanced cleaning cycles not available in standard driver menus.

: Changes the localized firmware settings of the mainboard. Supported Canon Printer Models