Dvb01 User Manual -

April 24, 2026 Category: Consumer Electronics / User Guides

Use dedicated lines from the power source for the DVB01 and the relay load.

Before wiring the module, it is important to understand its electrical limitations and capabilities to avoid damaging the components. dvb01 user manual

: If VIN drops below V2 OR rises above V1, the relay immediately releases (turns OFF).

Once you have programmed frequencies into multiple channels: April 24, 2026 Category: Consumer Electronics / User

To protect a lead-acid battery from deep discharge:

The DVB01 module is engineered around an energy-efficient microcontroller architecture. It features structural non-volatile memory, ensuring that all user-defined parameters are automatically saved and preserved during a power failure. Go to product viewer dialog for this item. Once you have programmed frequencies into multiple channels:

Use and NUM to set a delay if desired (0 to 99.9 seconds). This delays the relay action after a threshold is crossed, filtering out temporary voltage spikes or drops. Saving Settings:

Voltage monitoring in production lines. 6. Troubleshooting

Relay is engaged when the voltage is between the high limit (P₁) and low limit (P₂).

Long press [SET] to save all settings and exit to operational mode. The selected function will start running immediately.