Strands S68 Drill Press Manual

The Strands S68 features a versatile table assembly capable of height adjustment, rotation around the column, and 360-degree tilting.

Low oil level in the headstock or degraded, old oil.

Checking for play in the spindle bearings and tightening the spindle nut. C. Spare Parts List (Exploded Views)

Loosen the column clamping levers located on the back of the table bracket or headstock. Use the crank handle to operate the rack-and-pinion mechanism to raise or lower the assembly. Strands S68 Drill Press Manual

Up to 1.25 inches (32 mm) in steel or cast iron. Spindle Taper: Morse Taper No. 3 (MT3).

Is your machine a standard manual feed model, or does it feature ? Share public link

Check gear oil sight glass immediately; inspect spindle bearings for radial play. Damaged detent spring or misaligned shifter fork. The Strands S68 features a versatile table assembly

Tony Griffiths’ site is the gold standard for vintage machine documentation. They usually offer high-quality printed or digital copies for a small fee. VintageMachinery.org

Regularly check the sight glass located on the side or front of the headstock. The oil level should sit comfortably in the center of the glass.

Proper lubrication is essential for the long life of your S68. According to the official , the maintenance schedule is specific: Up to 1

A: Typically yes. "S68" and "68B" often refer to the same chassis, with the latter being a slight revision in the belt guard or motor mount.

Place shims under the base until the column is perfectly vertical.