Manual Alpina It 31015 [portable] Jun 2026

Page 12 shows the IT 31015 blown into 47 parts—each screw, spring, and washer labeled in four languages (Italian, German, French, and English that’s clearly translated by an engineer who hated adverbs). Collectors scan and frame this page.

Push the front hand guard forward until it clicks into the locked position.

: Move the run switch to "Stop", pull the spark plug out, and tug the starter rope repeatedly to clear excess fuel. Clean the spark plug electrode before reinstalling. Manual Alpina It 31015

Ensuring the ergonomic grips are tightened to prevent vibration fatigue.

: If storing for more than 30 days, drain the fuel completely and run the engine until it stalls to clear the carburetor. 5. Technical Specifications & Parts Bar Length : Typically compatible with a 16" (40cm) bar. Page 12 shows the IT 31015 blown into

: Electronic CDI with an aftermarket-compatible ignition coil.

This is the most important part of any chainsaw manual. It details crucial operating procedures: : Move the run switch to "Stop", pull

Improper assembly remains a primary cause of premature component wear and operational hazards. Follow these steps sequentially to prepare the tool:

: 40:1 or 50:1 petrol-to-oil mix (dependent on oil type—always use high-grade synthetic 2-stroke oil).

Even with the best maintenance, parts eventually wear out and need replacement. Here is a summary of where and what to look for.