Amada Pega 357 User Manual
Use polyurethane slug ejectors in the punch; utilize vacuum-assist die systems; demagnetize tools after grinding. Problem 3: Overtravel Alarms (X or Y Axis)
Check the stripper plate tension and lock the tool retaining mechanism. Stripper Clearance Warnings
50" x 72" standard, extendable to 50" x 144" with auto-repositioning. Max Material Thickness: 1/4" (6.35 mm) mild steel.
Ensure slug boxes under the die holders are empty to prevent back-ups that can smash tools.
Ensure the punch head move smoothly inside the guide. amada pega 357 user manual
5.5 KW main motor; requires 80 PSI (approx. 5–7 bar) air supply. Maszyneria 116410-PEGA-357 (04P-C) Parts List (Feb-1989 Ref. 16126)
Below is an overview of the essential information found in an , including technical specifications, operational procedures, and maintenance guidelines. 1. Technical Specifications
To ensure the longevity of the Pega 357, regular maintenance is crucial. Refer to the for detailed schedules. Routine Maintenance
The user manual categorizes the control interface into two main sections: the CRT display screen (for G-code programming and coordinates) and the machine operation panel (for manual manipulation). Main Operation Modes Use polyurethane slug ejectors in the punch; utilize
Navigating the 04PC is the primary method for tasks like:
Executes complete NC programs from memory. 3. Programming and Editing (Fanuc 04PC)
Align the guide keys of the punch and die accurately. Incorrect alignment will shave the die and ruin the tool.
When the machine faults, the controller will display specific alarm codes. The user manual divides these into CNC alarms and machine-specific interlock errors. Symptom: Machine Will Not Cycle (No Punch Action) Max Material Thickness: 1/4" (6
Typically 44 or 58 stations (including Auto-Index stations) CNC Control: Fanuc 0P-C (or standard Amadan 04P-C) 2. Safety First: Pre-Operation Protocols
Improper tool installation is the leading cause of turret damage. The manual dictates a strict sequence for loading punches and dies. Tool Installation Steps
Insert the punch assembly into the upper turret and check for smooth vertical movement. 5. Preventative Maintenance Schedule
