Setting up an L2TP (Layer 2 Tunneling Protocol) server on MikroTik is a reliable way to provide secure remote access. For modern security standards, it is strongly recommended to pair L2TP with IPsec encryption. 1. Create an IP Pool
# Check active L2TP interfaces /interface l2tp-server server print mikrotik l2tp server setup full
/ip ipsec peer add address=0.0.0.0/0 auth-method=pre-shared-key secret=MySuperSecretKey123 enc-algorithm=aes-256 hash-algorithm=sha256 exchange-mode=main-l2tp send-initial-contact=yes Setting up an L2TP (Layer 2 Tunneling Protocol)
Setting up an L2TP/IPsec VPN server on MikroTik involves defining an IP pool, creating a dedicated PPP profile with encryption, and configuring firewall rules for UDP ports 500, 1701, and 4500. Key steps include enabling the server, setting up user secrets, and activating proxy ARP on the bridge for local network access. For a detailed walkthrough, visit cloudhosting.lv . Create an IP Pool # Check active L2TP
/ip firewall filter add action=accept chain=input dst-port=1701,500,4500 protocol=udp comment="Allow L2TP/IPsec" add action=accept chain=input protocol=ipsec-esp comment="Allow IPsec ESP" Use code with caution. Copied to clipboard 6. Verification and NAT (Optional)
/log print where topics~"l2tp|ipsec"
Some implementations use GRE. It’s safe to allow:
