:
This reduces loop-back latency from ~15ms to under 2ms – critical for PID tuning or motor control.
After successful driver installation, you must point your Mitsubishi software to the correct virtual port. Open or GX Works2 . Navigate to the Online menu and click on Transfer Setup . jxmcu usbsc09fx driver download full
If the software cannot connect, check that the COM port number in the software matches the exactly. If the COM number is high (e.g., COM15), try reassigning it to a lower number (COM1-COM4) in Device Manager > Port Settings > Advanced. 3. Cable Not Recognized
Ensure that any Mitsubishi programming software (GX Developer, GX Works2, etc.) is completely closed before starting the driver installation. Open COM ports can interfere with driver installation. : This reduces loop-back latency from ~15ms to
Plug the device into USB. Open Device Manager → Other devices or Ports (COM & LPT) . Look for an unknown device with Hardware ID:
(baud rate, data bits, stop bits) to your PLC’s configuration. Navigate to the Online menu and click on Transfer Setup
: Another direct download option is available via XUEPLC . ⚙️ Installation Guide How to Install the USB-SC09-FX PLC Cable
Right-click the installation executable ( SETUP.exe for CH340 or CP210xVCPInstaller_x64.exe for Silicon Labs) and select .
