The geyser is currently powered down, but it will automatically click back on when your next scheduled "ON" program time is reached.

: Press the override button to heat water for 60 minutes. Note that the override will not function during peak demand "lock-out" times to prevent strain on the grid.

If you desire more granular control and modern smart features, a WiFi-enabled timer might be a better investment. Regardless of your choice, installing a geyser timer is one of the most effective single actions you can take to control your electricity costs. Remember always to have a qualified electrician perform the installation to ensure safety and compliance with local regulations.

This profile is the default setting and effectively disables the timer function, keeping the geyser powered on continuously. It is useful if you have a specific need for constant hot water or as a temporary override.

Verify that the screen displays the word AUTO . Press P to check your schedules and confirm that the days selected for "1_ON" are identical to the days selected for "1_OFF" .

A: No. The KES load control timer is for single-phase geysers up to 4.5 kW (20A). For 3-phase, you need a contactor driven by the KES output.

Adjusts the hour setting for the clock and timers.

Ensure the clock is set to the correct 24-hour time or AM/PM designation. 5. Benefits of Using a Geyser Timer

To check the , hold the "Override" and "Program" buttons simultaneously. The LED will flash to indicate the current hours, minutes, and day of the week. Geyser Load Control Timer ISG1201 Guide | PDF - Scribd

The override typically lasts for one hour (or until the next programmed event).

Mastering Your KES Geyser Load Control Timer: A Complete Guide

Disclaimer: This article is a general guide. Always refer to the official KES manual supplied with your specific product, as features and terminal assignments may vary between revisions.

To ensure the "Peak Time Lockout" works correctly, your timer’s Real Time Clock (RTC) must be accurate. buttons together.

Stays OFF for most of the day and night, specifically 00h00–03h00, 08h00–15h00, 20h00–24h00, and all peak times. Manual Override Feature